JAW CRUSHER MODEL 1 – 230V 1PH

£0.00

SKU: JAWCRUSHER1 Category:

Description

Used for laboratory and production purposes for crushing various hard, semi-hard and soft friable material such as abrasives, aggregate, chemicals, clays, coal, coke, foundry sands, gravel, minerals, natural and synthetic polymers, refractories and sintered metal powders. Depending on the nature of the raw material, the size reduction is to about 6mm and finer on No. 1 and to about 10mm and finer on No. 2. Heavy cast iron body and moving jaw stocks. Incorporate feed chutes with protective grids and covers.

Model No 1 discharge outlet is through a delivery chute fitted with protective baffle plate below the jaws. Model No 2 has a circular discharge outlet with a protective grid. The moving and fixed jaws of both models are fitted with replaceable ribbed manganese steel jaw plates, and the sides of the crushing chambers are lined with replaceable hardened steel wear plates.

The gap or nip between the moving and fixed jaws on both models can be adjusted for fine or coarse crushing by means of a hand wheel located at the back of the crusher. To maintain the gap selected the hand wheel is equipped with a locking hub. The moving jaw of both models can be fully retracted for ease of cleaning or to dislodge material from the crushing chamber. The moving jaw of each model is carried on an eccentric shaft fitted with a flywheel and a belt driven pulley. The bearings are bronze, oil impregnated and self oiling, and supplementary grease lubrication through grooves in the eccentric shaft and sealing discs protect the bearings from the ingress of dirt.

Electrics: 230v/1ph/50hz 750W
Jaw Opening: 76mm x 51mm
Final product size approx: 3-4mm
Dimensions (mm): 464x479x1156
Nett weight: 178kg

FOR REPAIRS, OUR MAINTENANCE SERVICE OR SPARES FOR THIS MACHINE,

PLEASE CONTACT THE SALES TEAM.

Additional information

Weight 178 kg
Dimensions 1156 × 464 × 479 cm